Welcome to EZvacuum.com Call Toll Free 1-877-693-9822 M-F 10am to 6pm EST  

Central Vacuum Fittings - Elbow, Spigot, Inlets, Sweep and more

38 Item(s)

per page

List  Grid 

Set Descending Direction
  1. 45 Degree Spigot L Central Vacuum Fitting

    45 Degree Spigot L Central Vacuum Fitting

    Fits directly into other fittings and then into 2 inch outside diameter pipe.
  2. Hose Link Adapter Central Vacuum Fitting

    Hose Link Adapter Central Vacuum Fitting

    Use two of these when connecting a Vac Pan or VacuSweep to flexible hose. This insures a air tight fit that won't leak and makes for an easier...
  3. 90 Degree Short L Central Vacuum Fitting

    90 Degree Short L Central Vacuum Fitting

    This 90 degree "L" is 2 inch outside diameter and used ONLY when attaching your inlet valve to the pipe. Any other 90 degree fittings you may need...
  4. 45 Degree Y Central Vacuum Fitting

    45 Degree Y Central Vacuum Fitting

    Connects branch lines to the trunk line. Great for reducing the amount of turns and bends.
  5. 90 Degree Flanged T with gasket Central Vacuum Fitting

    90 Degree Flanged T with gasket Central Vacuum Fitting

    The 90 Degree Flanged "T" with gasket is a white 2-inch PVC coupling specifically designed to have low internal surface friction for air handling...
  6. 90 Degree Sweep L Central Vacuum Fitting

    90 Degree Sweep L Central Vacuum Fitting

    Our 90 degree sweep "L" is designed to be used with all 2 inch outside diameter pipe. Use in all areas where a subtle 90 degree is needed.
  7. PVC Plaster Guard with Leak Detector Central Vacuum Fitting

    PVC Plaster Guard with Leak Detector Central Vacuum Fitting

    This Plaster Guard does more than protect your inlet valve it detects a leak in the valve saving you time and money. Finds leaks BEFORE you seal up...
  8. 30 Degree L Central Vacuum Fitting

    30 Degree L Central Vacuum Fitting

    Use this fitting when subtle angles are needed. Combine two of these fittings and it will provide you with a 60 degree gentle turn.
  9. 22 Degree Sweep L for Vacuum System and Hide-A-Hose Central Vacuum Fitting

    22 Degree Sweep L for Vacuum System and Hide-A-Hose Central Vacuum Fitting

    Fits all 2 inch vacuum pipe this 22 Degree Sweep "L" is designed for VERY SUBTLE turns. There is virtually little or no air restriction when using...
  10. Pipe Collar Central Vacuum Fitting

    Pipe Collar Central Vacuum Fitting

    When coming out of garage walls or similar applications this covers the hole the pipe exits out of. Makes for a clean, professional looking...
  11. 45 Degree L Central Vacuum Fitting

    45 Degree L Central Vacuum Fitting

    Use 45 degree fittings as much as possible to smooth out the air flow.
  12. Pipe Adapter For 1 13/16 To Fit 2 Outside Diameter Pipe Central Vacuum Fitting

    Pipe Adapter For 1 13/16 To Fit 2 Outside Diameter Pipe Central Vacuum Fitting

    Adapts your 1 13/16 inch outside diameter pipe to fit 2 inch outside diameter pipe.
  13. Double Y Central Vacuum Fitting

    Double Y Central Vacuum Fitting

    Connects lines together to a trunk line.
  14. 45 Degree Sweep L for vacuum systems and Hide-A-Hose Central Vacuum Fitting

    45 Degree Sweep L for vacuum systems and Hide-A-Hose Central Vacuum Fitting

    Fitting all 2 inch vacuum pipe this 45 Degree Sweep "L" connects your system with the minimum of air flow restriction. This provides the maximum...
  15. 90 Degree Double WYE Central Vacuum Fitting

    90 Degree Double WYE Central Vacuum Fitting

    90 Degree Double WYE Central Vacuum Fitting
  16. 90 Degree Double Flanged T with gaskets Central Vacuum Fitting

    90 Degree Double Flanged T with gaskets Central Vacuum Fitting

    This 90 Degree Double Flanged "T". This 90 degree double flanged "T" comes with gaskets for secure mounting.
  17. 90 Degree Short L for 2 x 3 Walls Central Vacuum Fitting

    90 Degree Short L for 2 x 3 Walls Central Vacuum Fitting

    For 2 x 3 wall applications when running directly into valves. This 90 degree "L" is 2 inch outside diameter and used ONLY when attaching your...
  18. PVC Plaster Guard Central Vacuum Fitting

    PVC Plaster Guard Central Vacuum Fitting

    For use in new construction or remodeling. Place these over the inlet valve mounting plates. Protects the mounting plates from plasterers and...
  19. 38 Degree L Central Vacuum Fitting

    38 Degree L Central Vacuum Fitting

    Use this fitting when subtle angles are needed.
  20. 90 Degree Sweep Spigot L Central Vacuum Fitting

    90 Degree Sweep Spigot L Central Vacuum Fitting

    Use this sweep "L" fitting when installing a muffler on your vacuum system or for any pipe installation requirements needing this fitting. One side...
  21. J Clip Pipe Hanger Central Vacuum Fitting

    J Clip Pipe Hanger Central Vacuum Fitting

    For application when running your pipe overhead. Secures it firmly and safely. Great for basement applications as well as attics. If you run pipe...
  22. 30 Degree Spigot L Central Vacuum Fitting

    30 Degree Spigot L Central Vacuum Fitting

    Use this fitting when subtle angles are needed. One side fits 2 inch outside diameter pipe and the other goes into any fitting.
  23. Pipe Strap with wire retainer clip Central Vacuum Fitting

    Pipe Strap with wire retainer clip Central Vacuum Fitting

    Secure your vacuum pipe to avoid air vibration noise. Retainer clip is used to secure your low voltage wire safely. Use one per 5 to 8 feet of pipe.
  24. Three Way 90 Degree L Central Vacuum Fitting

    Three Way 90 Degree L Central Vacuum Fitting

    For use in connecting three lines together.
  25. Short T Central Vacuum Fitting

    Short T Central Vacuum Fitting

    For 2 x 3 wall applications when running additional line up or down.
  26. Pipe Stop Coupling Central Vacuum Fitting

    Pipe Stop Coupling Central Vacuum Fitting

    Connects any 2 inch outside diameter pipe together for a sure fit.
  27. Central Vacuum Exhaust Muffler Square shaped- 12"

    Central Vacuum Exhaust Muffler Square shaped- 12"

    $19.99

    Is your central vacuum too noisy? This is the square exhaust muffler which suppresses the noice. It is 12" with 2 inch opening. If you want to...
  28. Hayden 3 Inlet Super Valve Central Vacuum Installation Kit

    Hayden 3 Inlet Super Valve Central Vacuum Installation Kit

    $69.95

    This kit comes with all fittings and parts needed for 3 inlets. Instructions are also included. Pipe not included, and sold separately. Kit can...
  29. 90 Degree Sweep T Central Vacuum Fitting

    90 Degree Sweep T Central Vacuum Fitting

    Connects branch lines to the trunk line. Be sure the airflow direction is correct.
  30. Pipe Cap Central Vacuum Fitting

    Pipe Cap Central Vacuum Fitting

    Caps off any 2 inch outside diameter pipe for later use.
  31. Central Vacuum Exhaust Pipe Filter

    Central Vacuum Exhaust Pipe Filter

    The Centra Micro Filtration Exhaust Dust Bag fits any central vacuum unit's exhaust that is vented indoors. It will collect any fine dust particles...
  32. 90 Degree Short Flanged L with gasket Central Vacuum Fitting

    90 Degree Short Flanged L with gasket Central Vacuum Fitting

    The 90 Degree Short Flanged "L" with gasket is a white 2-inch PVC coupling specifically designed to have low internal surface friction for air...
  33. Central Vacuum Exhaust Muffler 12"

    Central Vacuum Exhaust Muffler 12"

    $19.99

    Is your central vacuum too noisy? This is the round cylindrical exhaust muffler which suppresses the noice. It is 12" with 2 inch opening. If you...
  34. Pipe Adapter for 1 3/4 to fit 2 Outside Diameter Pipe Central Vacuum Fitting

    Pipe Adapter for 1 3/4 to fit 2 Outside Diameter Pipe Central Vacuum Fitting

    Adapts your 1 3/4 inch outside diameter pipe to fit 2 inch outside diameter pipe.
  35. Inlet Valve Extension Central Vacuum Fitting

    Inlet Valve Extension Central Vacuum Fitting

    To be used when your wall is to thick and won't connect your pipe to your inlet valve. More than one can be used, the fit into each other well....
  36. Exhaust Vent Cap Large Central Vacuum Fitting

    Exhaust Vent Cap Large Central Vacuum Fitting

    This large vent cap is ideal for high performance vacuum systems allowing the exhaust air to vent safely outside. Prevents rain and insects...
  37. Exhaust Vent Cap  Central Vacuum Fitting

    Exhaust Vent Cap Central Vacuum Fitting

    Need to exhaust your system to the outside or other areas? Installs quickly and keeps dirt and unwanted debris from coming back into your exhaust...
  38. 90 Degree Sweep L for vacuum systems and Hide-A-Hose Central Vacuum Fitting

    90 Degree Sweep L for vacuum systems and Hide-A-Hose Central Vacuum Fitting

    Out of stock

    This Sweep 90 degree "L" is 16 inches long and fits all 2 inch vacuum pipe and provides the absolute least resistance to airflow more than any...

38 Item(s)

per page

List  Grid 

Set Descending Direction