Details
Genuine Hoover FH51000, FH51001 FH51002 Steam Vac Non Stretch Belt. Measures 11.5" when laid flat
Fits Hoover FH51000, FH51000RM, FH51001 models.
Quantity - 1 belt
Part no # 440005536, H-440005536
.
5.22 Replace belt by placing on shaft.
5.23 Replace pivot clamp and 2 screws over the belt.
5.24 Replace upper belt cover, flip cleaner, and screw in 7
screws.
5.25 Slip brushrolls through belt. NOTE: Place belt on
rounded areas of the brushrolls without brushes.
5.26 With belt in place, push and slide brushrolls into unit,
making sure that the brushrolls are in the correct orientation.
5.27 Slide belt roll end cap back into unit and replace 3
screws.
5.28 Replace belt guard and secure with final 3 screws
Fits Hoover FH51000, FH51000RM, FH51001 models.
Quantity - 1 belt
Part no # 440005536, H-440005536
.
How to replace FH51000 Belt
5.22 Replace belt by placing on shaft.
5.23 Replace pivot clamp and 2 screws over the belt.
5.24 Replace upper belt cover, flip cleaner, and screw in 7
screws.
5.25 Slip brushrolls through belt. NOTE: Place belt on
rounded areas of the brushrolls without brushes.
5.26 With belt in place, push and slide brushrolls into unit,
making sure that the brushrolls are in the correct orientation.
5.27 Slide belt roll end cap back into unit and replace 3
screws.
5.28 Replace belt guard and secure with final 3 screws
California residents see Prop 65 WARNINGS WARNING! This product contains a chemical know to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warning.ca.gov
- You can also find this product in:
Additional Information
SKU | 440005536 |
---|---|
Brand | Hoover |
Manufacturer | Hoover |
Is the windtunnel belt compatible
A:
Whats the model number of your vacuum?
Support answered on October 29, 2018
What are the specs of this belt, like length and width?
A:
This belt is 11.5" when laid flat
Support answered on May 23, 2018
This is not an oem product.
A:
This is a made by Hoover belt.
EZvacuum Support answered on November 19, 2019