Details
Fits Panasonic Canister Vacuums including MC-UG787-00, MC-CG885, MC-CG887, MC-CG937-00, MC-UL915-00, MC-UL975-00 Vacuum Cleaner. It is the newer Poly Ribbed Serpentine Style Belt which is grooved from inside. Replaces Part # MC-V370B, MCV370B
.
How to change Belt
Check and remove hair, string and lint build-up frequently in the Power Nozzle brush and brush support areas. If build-up becomes excessive, disconnect Power Nozzle from wand and follow the steps below.
➢ Turn off and unplug vacuum cleaner.
➢ Turn Power Nozzle over.
➢ Unscrew the two (2) Power Nozzle cover screws.
➢ Turn Power Nozzle right side up.
➢ Press handle release pedal and lower the swivel.
➢ Lift rear latches up.
➢ To remove cover, grasp the sides and pull out.
➢ Tilt cover forward from back until front snaps free.
➢ Lift agitator assembly out.
➢ Remove worn belt.
➢ Install new belt in belt path on the agitator assembly, then over the motor shaft.
➢ Place agitator assembly back into Power Nozzle.
➢ Line up front of cover and base.
➢ Rest cover on front edge of base as shown.
➢ Tilt cover to back.
➢ Press cover firmly until latches snap into place.
➢ Replace cover screws
.
How to change Belt
Check and remove hair, string and lint build-up frequently in the Power Nozzle brush and brush support areas. If build-up becomes excessive, disconnect Power Nozzle from wand and follow the steps below.
➢ Turn off and unplug vacuum cleaner.
➢ Turn Power Nozzle over.
➢ Unscrew the two (2) Power Nozzle cover screws.
➢ Turn Power Nozzle right side up.
➢ Press handle release pedal and lower the swivel.
➢ Lift rear latches up.
➢ To remove cover, grasp the sides and pull out.
➢ Tilt cover forward from back until front snaps free.
➢ Lift agitator assembly out.
➢ Remove worn belt.
➢ Install new belt in belt path on the agitator assembly, then over the motor shaft.
➢ Place agitator assembly back into Power Nozzle.
➢ Line up front of cover and base.
➢ Rest cover on front edge of base as shown.
➢ Tilt cover to back.
➢ Press cover firmly until latches snap into place.
➢ Replace cover screws
California residents see Prop 65 WARNINGS WARNING! This product contains a chemical know to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warning.ca.gov
- You can also find this product in:
Additional Information
SKU | MC-V370B |
---|---|
Brand | Panasonic |
Manufacturer | Generic |
courroie 46-3300-03
No answers yet.
Be the first to answer this question
Be the first to answer this question
How do you change the belt?
No answers yet.
Be the first to answer this question
Be the first to answer this question
How do you change the belt?
No answers yet.
Be the first to answer this question
Be the first to answer this question