Similar Items
Shark Rocket 3pc Foam & Felt Filter Kit for Shark Rocket Ultra-Light Vacuum HV292, HV300, HV300W, HV301, HV302, HV303, HV305, HV308, HV310, UV450 Part XFFV300, 655
$13.99
Shark Rocket 3pc Foam & Felt Filter COMBO Kit XFFV300 for HV292, HV300, HV300C, HV300W, HV300WC, HV301, HV301C, HV302, HV302Q, HV303, HV305, HV310, UV450, UV450CCO, UV450CCOFS etc, 655
$20.99
Shark Rocket Powerhead Exhaust Filter #XEXFH400 for AH400, AH400C, AH401, AH452, AH452W, AH454Q
$10.99
Details
High Performance HEPA Filter for Shark Rotator Professional uprights. Fits NV200, NV200C, NV200Q, NV201, NV202, NV202C , NV350, NV352, NV355, NV356E, NV370, NV372, NV450, NV480**, NV480C, NV480Q, NV482, NV391, NV450, NV451, NV472, NV480, UV440, UV490CCO, UV540,
Shark Rotator Pro with XL Reach NV450
Shark Rocket Professional Performance Plus NV472
Shark Rocket Pro NV480
Shark Rocket professional model NV484
Replaces Part #XHF450, EU-18016
Height is 2 1/4"
Short side is 4 3/8"
Long side is 3 1/2"
⚠️ ** XHF450 does not fit NV480 vacuums manufactured after March 2013. Please check the height of your current filter before ordering
.
Shark Rotator Pro with XL Reach NV450
Shark Rocket Professional Performance Plus NV472
Shark Rocket Pro NV480
Shark Rocket professional model NV484
Replaces Part #XHF450, EU-18016
Height is 2 1/4"
Short side is 4 3/8"
Long side is 3 1/2"
⚠️ ** XHF450 does not fit NV480 vacuums manufactured after March 2013. Please check the height of your current filter before ordering
.
How to change XHF450 Filter
1 Press the dust cup release button and lift the dustcup off the vacuum.
2 Holding the dust cup over a garbage bag or can, press the bottom empty release latch located near the bottom of the front of the dust cup.
3 Press the top dust cup release latch to access and clean dust screen as required.
4 With the dust cup removed, remove the foam and felt filters. Replace it with the filters kit XFF450. After every 5 vacuum uses, rinse the filters with cold water. Let air dry completely before replacing. Hand wash only. Tap loose dirt off filters between washes as needed.
5 Remove and rinse the HEPA filter frame every 3 Months. First, remove the floor nozzle by pressing the red nozzle release button on the side of the vacuum. Turn the latch to the unlock symbol to release the filter frame. Remove the the HEPA filter you just bought at EZvacuum.com.
6 Re-assemble back on to floor nozzle
1 Press the dust cup release button and lift the dustcup off the vacuum.
2 Holding the dust cup over a garbage bag or can, press the bottom empty release latch located near the bottom of the front of the dust cup.
3 Press the top dust cup release latch to access and clean dust screen as required.
4 With the dust cup removed, remove the foam and felt filters. Replace it with the filters kit XFF450. After every 5 vacuum uses, rinse the filters with cold water. Let air dry completely before replacing. Hand wash only. Tap loose dirt off filters between washes as needed.
5 Remove and rinse the HEPA filter frame every 3 Months. First, remove the floor nozzle by pressing the red nozzle release button on the side of the vacuum. Turn the latch to the unlock symbol to release the filter frame. Remove the the HEPA filter you just bought at EZvacuum.com.
6 Re-assemble back on to floor nozzle
California residents see Prop 65 WARNINGS WARNING! This product contains a chemical know to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warning.ca.gov
- You can also find this product in:
Additional Information
SKU | XHF450 |
---|---|
Brand | Shark |
Manufacturer | Shark |