Details
Genuine Shark XFF400 Filter Kit for Shark NV400, NV402
Kit includes 1 Foam and 1 Felt Filter.
Fits Shark models NV400 and NV402
.
Kit includes 1 Foam and 1 Felt Filter.
Fits Shark models NV400 and NV402
.
How to change Filters
1 Press the dust cup release button and lift the dustcup off the vacuum.
2 Holding the dust cup over a garbage bag or can, slide the bottom empty release latch located midway down the front of the dust cup.
3 Press the top dust cup release latch to access and clean dust screen as required.
4 With the dust cup removed, remove the foam and felt filters you bought at EZvacuum.com every 3 months. After every 5 vacuum uses, rinse the filters in cold water. Let air dry completely before replacing. Hand wash only. Tap loose dirt off filters between washes as needed. Change the foam filter if the dirt is set deep into the filter pores.
5 Remove the HEPA filter frame once every 3 months. First, remove the floor nozzle by pressing the red nozzle release button on back of vacuum. Rotate counter-clockwise to release the filter frame. Remove the HEPA filter and replace it with the new filter XHF400
6. Re-assemble back on to floor nozzle.
1 Press the dust cup release button and lift the dustcup off the vacuum.
2 Holding the dust cup over a garbage bag or can, slide the bottom empty release latch located midway down the front of the dust cup.
3 Press the top dust cup release latch to access and clean dust screen as required.
4 With the dust cup removed, remove the foam and felt filters you bought at EZvacuum.com every 3 months. After every 5 vacuum uses, rinse the filters in cold water. Let air dry completely before replacing. Hand wash only. Tap loose dirt off filters between washes as needed. Change the foam filter if the dirt is set deep into the filter pores.
5 Remove the HEPA filter frame once every 3 months. First, remove the floor nozzle by pressing the red nozzle release button on back of vacuum. Rotate counter-clockwise to release the filter frame. Remove the HEPA filter and replace it with the new filter XHF400
6. Re-assemble back on to floor nozzle.
California residents see Prop 65 WARNINGS WARNING! This product contains a chemical know to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warning.ca.gov
- You can also find this product in:
Additional Information
SKU | XFF400 |
---|---|
Brand | Euro Pro |
Manufacturer | EuroPro |