Details
Replacement Shark XFH400 Rotator Professional with XL Reach NV400 Exhaust HEPA Filter. Fits Shark Rotator Professional with XL Reach NV400 & Shark Rotator Professional with XL Reach NV402 upright vacuum cleaner. Height is 2 1/4" and diameter is 4 1/2" on top and 4" app.
Replaces Part no # XFH400, EU-18018, XHF400
.
Replaces Part no # XFH400, EU-18018, XHF400
.
How to change XFH400 Filter
1 Press the dust cup release button and lift the dustcup off the vacuum.
2 Holding the dust cup over a garbage bag or can, slide the bottom empty release latch located midway down the front of the dust cup.
3 Press the top dust cup release latch to access and clean dust screen as required.
4 With the dust cup removed, remove and rinse the foam and felt filters - XFF400 every 3 months. Let air dry completely before replacing. Hand wash only. Tap loose dirt off filters between washes as needed. Change the foam filter if the dirt is set deep into the filter pores.
5 Remove the HEPA filter frame once every 3 months. First, remove the floor nozzle by pressing the red nozzle release button on back of vacuum. Rotate counter-clockwise to release the filter frame. Remove the HEPA filter and replace it with the new filter you bought at EZvacuum.com.
6. Re-assemble back on to floor nozzle.
1 Press the dust cup release button and lift the dustcup off the vacuum.
2 Holding the dust cup over a garbage bag or can, slide the bottom empty release latch located midway down the front of the dust cup.
3 Press the top dust cup release latch to access and clean dust screen as required.
4 With the dust cup removed, remove and rinse the foam and felt filters - XFF400 every 3 months. Let air dry completely before replacing. Hand wash only. Tap loose dirt off filters between washes as needed. Change the foam filter if the dirt is set deep into the filter pores.
5 Remove the HEPA filter frame once every 3 months. First, remove the floor nozzle by pressing the red nozzle release button on back of vacuum. Rotate counter-clockwise to release the filter frame. Remove the HEPA filter and replace it with the new filter you bought at EZvacuum.com.
6. Re-assemble back on to floor nozzle.
California residents see Prop 65 WARNINGS WARNING! This product contains a chemical know to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warning.ca.gov
- You can also find this product in:
Additional Information
SKU | XFH400 |
---|---|
Brand | Euro Pro |
Manufacturer | Envirocare Technologies |