Details
- Single stage
- 9.0" diameter
- 120 volts
- Motor Type: Bypass
- Discharge: Tangential
- Bearings: Double Ball Bearing
- Sealed Vacuum: 71.2 inches
- Maximum Air Watts: 833
- Maximum Air Flow: 244.5CFM
- Maximum Amps: 15.5
- Motor Speed: 27,680RPM
- Tested brush life 4500 hours plus with changing out the brushes when required
- Comes with interrupter bushes which pull away from the armature when almost worn out preventing armature damage
SPECIAL FEATURES
- Suitable for 120 volt AC operation
- UL recognized
- CSA certified
- Provision for grounding
- Open frame design
- The Lamb Electric vacuum motor line offers a wide range of performance levels to meet design needs
.
![Lamb: L-119892-00 MOTOR, 9" 1 STAGE 120 VOLT B/B TANGENTIAL FLO-TEK 119892-04]()
- 9.0" diameter
- 120 volts
- Motor Type: Bypass
- Discharge: Tangential
- Bearings: Double Ball Bearing
- Sealed Vacuum: 71.2 inches
- Maximum Air Watts: 833
- Maximum Air Flow: 244.5CFM
- Maximum Amps: 15.5
- Motor Speed: 27,680RPM
- Tested brush life 4500 hours plus with changing out the brushes when required
- Comes with interrupter bushes which pull away from the armature when almost worn out preventing armature damage
SPECIAL FEATURES
- Suitable for 120 volt AC operation
- UL recognized
- CSA certified
- Provision for grounding
- Open frame design
- The Lamb Electric vacuum motor line offers a wide range of performance levels to meet design needs
.
California residents see Prop 65 WARNINGS 
WARNING! This product contains a chemical know to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warning.ca.gov
WARNING! This product contains a chemical know to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warning.ca.gov- You can also find this product in:
Additional Information
| SKU | 119892-04 |
|---|---|
| Brand | Ametek |
| Manufacturer | Ametek Lamb |
Wondering if this item number will work for replacing 119892-00 120 50/60hz
A:
Yes
EZvacuum Support answered on January 13, 2020
