Collection: Products

The axle on the Windsor Versamatic VSE 1/3 takes a beating on hard floors and tight corners — when it wears or breaks, this OEM-spec replacement ge...

The brushroll pulley on the Windsor VersaMatic transfers drive power from the motor belt to the brush roll — when it cracks, wears, or seizes, agit...

Windsor Versamatic Drive Belt Motor Pulley. Fits Windsor Models: VS14, VS18, VSP14, VSP18. Manufacturer Part No.: 8.614-442.0, 86144420, WI-2025

The complete 3/W neck assembly for the Windsor Versamtic 2/3 commercial vacuum restores the structural connection between the handle and the cleani...

The chassis assembly is the structural backbone of the Windsor VS14 and Sebo 370 Electronic commercial uprights — replacing a cracked or damaged un...

The exhaust HEPA filter on the Windsor VS14 vacuum sits at the last line of defense before air exits the machine, capturing fine particles that byp...

The handle cover on the Windsor VS14 Sensor keeps the operator's grip area intact and protects the internal handle assembly from wear and impact. W...

The motor filter on the Windsor VSE 1-3 sits between the airstream and the motor, blocking fine debris that can shorten motor life. Replacing it on...

The motor is the heart of the Windsor VSE14 and VSM14, and when it goes, suction drops fast. This replacement motor restores factory-level performa...

Fits Windsor VSP14 as well. Will also replace Sebo ET-C Power Head Drive Belt. Qty - 1 belt part no # WI-2049, 2049, 8.623-539.0

Windsor replacement brush roll brush strip for 18 inch Windsor vacuum cleaner brush rolls - Generic

Windsor geared belt.Fits all Versamatic modelsALSO FITS CV-141. 130XL Belt

Genuine brush roll with no ends fits Windsor Versamatic 14" vacuum cleaners. Also fits for Sebo Brush Assembly 370 ET-C ET350 2030ER. The roller it...

Windsor 14 inch vacuum cleaner brush strip designed to fit the Versamatic VS14 model. Brush strips for Windsor Versamatic 14 Inch upright. Black

Fits all Windsor Versamatic models. DOES NOT FIT VERSAMATIC PLUS.

Genuine Windsor replacement vacuum cleaner brush roll brush strip for 18 inch Windsor brush rolls.

Windsor VERSAMATIC heavy duty replacement brush strip for 18 inch Windsor vacuum cleaner brush rolls - Genuine .

18" Agitator assembly for Windsor upright vacuum models Sensor SR-18, Part# WI-5276WI, WI5276WI, 8.613-877.0, 86138770, 5276-WI

Windsor's Wide Area Wave vacuum runs best with the right filtration — these OEM-spec paper bags keep airflow unrestricted and fine dust contained, ...

The wind axle rear on your Windsor or Sebo upright takes constant stress during every cleaning pass — swap in this direct replacement before wear a...

Windsor XP12 Commerical Vacuum 3 Wire Internal Cable #5255ER Fits Windsor models

The male contact holder on the Windsor XP15 is a key electrical component — when it wears or fails, power delivery to the machine is compromised. T...

The Windsor XT-18 Commercial Motor Assembly is the factory-spec replacement motor for Windsor SR15 and S12 vacuum models — restoring full suction p...

The wire harness on the Maytag M1200 Upright ties together the vacuum's electrical connections — when it fails, nothing runs right. Part B483-0300B...

The wiring harness on the Hoover CH34006 Backpack carries power through the entire vacuum system — when it fails, nothing runs right. Part #4400090...

WORKSHOP wet dry vacuum filter bags are designed to filter dry, everyday dirt debris for WORKSHOP PP0100VA, 2.5 gallon WS0250VA, 5 gallon WS0500VA,...

Extend your reach above and beyond with the 2-1/2-inch diameter wet dry vacuum hose extension wand. Take advantage of the maximum airflow to pick u...