Similar Items
Details
It can be frustrating for a homeowner to clean under the refrigerator or furniture, the places being hard to reach with a conventional vacuum cleaner. You no longer need to fret about that anymore with this vacuum attachment, bendable 180 degrees, and can be attached to any vacuum cleaner. This is a flexible vacuum cleaner attachment to clean under the refrigerator or the hard to reach refrigerator coils. It is 36 inches long allowing you to clean all those hard-to-reach places which are otherwise left dirty. Any vacuum that can fit 1 ¼" inner diameter attachments or uses standard 1.25" diameter straight pipe wand ends can also fit this attachment to make vacuuming those pesky spots a breeze.
This tool can bend 180 degrees and will fit any vacuum cleaner which takes 1 1/4" inner diameter attachments or using standard 1.25" diameter straight pipe wand ends. This is 36 inches long and will easily reach a great deal under most fridges. This will also work under washers, dryers, furniture like sofas, china cabinet, office cabinets and more.
Some of the vacuum brands which can work with this attachment are Bissell, Carpet Pro, Cirrus, Dirt Devil, Electrolux, Eureka, Euro Pro, Shark (needs adapter), Fuller Brush, Hoover, Kenmore, Kirby, Lindhaus, Miele, Nobles, Nutone, Oreck, Powr Flite, Riccar, Royal, Samsung, Sandia, Sanitaire, Sanyo, Sebo, Sharp, Simplicity, Tornado, Windsor, etc
.
This tool can bend 180 degrees and will fit any vacuum cleaner which takes 1 1/4" inner diameter attachments or using standard 1.25" diameter straight pipe wand ends. This is 36 inches long and will easily reach a great deal under most fridges. This will also work under washers, dryers, furniture like sofas, china cabinet, office cabinets and more.
Some of the vacuum brands which can work with this attachment are Bissell, Carpet Pro, Cirrus, Dirt Devil, Electrolux, Eureka, Euro Pro, Shark (needs adapter), Fuller Brush, Hoover, Kenmore, Kirby, Lindhaus, Miele, Nobles, Nutone, Oreck, Powr Flite, Riccar, Royal, Samsung, Sandia, Sanitaire, Sanyo, Sebo, Sharp, Simplicity, Tornado, Windsor, etc
.
California residents see Prop 65 WARNINGS WARNING! This product contains a chemical know to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warning.ca.gov
- You can also find this product in:
Additional Information
SKU | 32-1842-02_36 |
---|---|
Brand | EZvacuum |
Manufacturer | EZvacuum |
Does this product fit a dyson D.C. 25.
A:
only when used with the 35 to 33mm adapter
Support answered on January 24, 2017
Does it fit Shark?
A:
Yes it does.
Kevin answered on February 15, 2016
Will this work on a epic eletrolux?
A:
Yes. But you may need Epic Adapter tube #26-1000-08 if you do not already have. With that adapter, you can many more attachments.
Kevin answered on January 4, 2016
How do I attach the flexible hose I bought to my shark vac. Won't fit over end or inside end
A:
You would need this adaptor https://www.ezvacuum.com/fit-all-vacuum-cleaner-attachment-adpator-1-12-to-1-14-p-3423.html
Kevin answered on August 15, 2016
Don't know if it will fit under our refrigerator. How tall is it? Like 1/2", 1/4", etc.
A:
Its has a very slim profile. App 1/2 inches. Most of the fridges have that much clearance easily.
Kevin answered on December 3, 2015
Can I use these attachments with a Shark Vacuum? Modelhark Navigator Lift Away Pro
A:
Yes. But you would need the adapter. Here is the attachment plus adapter combo https://www.ezvacuum.com/shark-under-appliance-attachment-tool-wand-adaptor.html
Kevin answered on August 19, 2016
Will this fit the new Kenmore Elite pet friendly ultra plush Canister Vacuum
A:
Yes
Support answered on April 16, 2019
Does the hose slide on the outside of the vacuum's hose? Does it fit a Hoover Constellation canister vacuums ' hose?
A:
Yes it slides outside the hose end of your vacuum. It will fit the fit which takes 1 1/4" attachments.
Kevin answered on November 23, 2015
Will under refrigerator attachment fit Hoover Windtunnel hose or do I need 1.25 to 1.5 adaptor?
A:
If your hose does not take the 1.25 inch tools, then look for adaptor # 14-1000-02
Kevin answered on November 23, 2015
How thick is the attachment? 1/4"? 1/2"? Our gap under the refrigerator is small.
A:
it will easily slide under most refrigerators as it has a slim profile about 1/2 inch.
Kevin answered on December 3, 2015
I need the height to be 1/8", do you supply this size?
A:
for which vacuum cleaner do you need this part for ?
Kevin answered on March 21, 2016
will this tool fit a 6582 model?
A:
What is the vacuum cleaner brand name ?
Kevin answered on March 21, 2016
Will this fit an in house vacuum (beam)?
A:
Yes. It will work with wand or hoses taking 1 1/4 inch attachments
EZvacuum Support answered on February 1, 2017
Will this work on carpet or just hardwood floor?
A:
It will work on both
Support answered on September 24, 2018
Can the flexible crevice tool fit the Dyson motorhead cordless wacuum cleaner?
Thank yoi
A:
It will fit the vacuum cleaners which takes 1 1/4" attachments only.
Kevin answered on April 16, 2016
will this work with a dyson
No answers yet.
Be the first to answer this question
Be the first to answer this question
Will it fit a Eureka mighty mite model 3110 B?
A:
Yes it will work with mighty mite canisters
Kevin answered on August 13, 2016
Does it fit dyson animal?
A:
It will fit the vacuum cleaners which takes 1 1/4" attachments only.
Kevin answered on July 23, 2016
Do you have this product for Shop-Vac, 10 gallones.,Model:QPL 625
A:
You might have to use a reducer to 1 1/4" if you are using wider hose/wand
support answered on May 1, 2018
Will this fit a Miele vacuum?
A:
You would need this adapter with that: https://www.ezvacuum.com/fit-all-vacuum-cleaner-attachment-adpater-1-1-4-to-35mm.html
Support answered on May 31, 2018
Will it fit a Miele vacuum?
A:
Yes. But you will need an adapter which you can find here:
https://www.ezvacuum.com/fit-all-vacuum-cleaner-attachment-adpater-1-1-4-to-35mm.html
https://www.ezvacuum.com/fit-all-vacuum-cleaner-attachment-adpater-1-1-4-to-35mm.html
EZvacuum Support answered on January 30, 2020
I have a Shark Rocket, will the flexible crevice tool work with the Rocket? Shark is charging $33.00 for the "name brand" one
A:
Please check this one out. It comes with the adapter you will need for Rocket
https://www.ezvacuum.com/shark-under-appliance-attachment-tool-wand-adaptor.html
https://www.ezvacuum.com/shark-under-appliance-attachment-tool-wand-adaptor.html
Support answered on January 13, 2017
Will it fit Shop Vac 1-1/4"?
A:
Yes It will work with 1 1/14 inch hose ends
Support answered on October 6, 2016
Does this fit a Mighty Mite II (Model 3630)? If not, do you have another product for under appliances that will work? Thanks.
A:
Yes. It will work
Support answered on October 9, 2018
Does it fit Apex 2100
No answers yet.
Be the first to answer this question
Be the first to answer this question
This won't fit on a shark power lift away will it
A:
You will need the adaptor. or you may buy the combo here at https://www.ezvacuum.com/shark-under-appliance-attachment-tool-wand-adaptor.html
Kevin answered on August 18, 2016
to clean floor vents eureuka
A:
Yes. It will work
Support answered on April 29, 2019
will this fit on an electrolux EL7063A
A:
Yes
Support answered on October 8, 2018
Will this attachment fit a Dyson vacuum?
A:
If you have a dyson adapter it will work with that. https://www.ezvacuum.com/dyson-dc07-adapter-for-bagless-upright-35mm-to-33mm-10-1002-04-generic.html
EZvacuum Support answered on February 5, 2017
Can this work with the Shark Rotator Model NV500?
Kindest Regards
Haden
A:
Yes. But you need this adapter too: https://www.ezvacuum.com/fit-all-vacuum-cleaner-attachment-adpater-35mm-to-1-1-4.html
Support answered on June 10, 2019
Will it fit on a Sirena vacuum
No answers yet.
Be the first to answer this question
Be the first to answer this question
Does this work with the Miele C1 canister vac?
A:
Yes. But you would need this adapter along with the tool: https://www.ezvacuum.com/fit-all-vacuum-cleaner-attachment-adpater-1-1-4-to-35mm.html
EZvacuum Support answered on February 10, 2020
What's the material? Is it made up of rubber or plastic? Hard or soft ? Does it fit on Bissell vacuums?
A:
Its a soft plastic. For bissell, you will need this adapter: https://www.ezvacuum.com/panasonic-vacuum-cleaner-adapter-tube-to-std-1-14-p-4591.html
Support answered on February 20, 2019
Will this fit the rainbow vacuum?
A:
Yes
EZvacuum Support answered on February 17, 2020
Can this attachment also be used to clean dryer vents? Thanks.
A:
Yes. It is flexible enough to go deep into the vent and take all lint and debris with it.
Support answered on June 3, 2019
Will this fit Hoover S3765 Wind Tunnel?
A:
Yes, it will work as it takes 1 1/4" attachments.
EZvacuum Support answered on June 27, 2022
Does it work with the shark navigator
A:
Please buy this one with the adapter here: https://www.ezvacuum.com/shark-under-appliance-attachment-tool-wand-adaptor.html
Support answered on April 3, 2019
Does this fit the Kenmore Elite 800 Series cannister?
A:
yes, only if it can take 1 1/4" friction fit attachments. Won't latch on to the hose since it does not have a button
EZvacuum Support answered on September 16, 2022
Will this fit Shark IonFlex?
No answers yet.
Be the first to answer this question
Be the first to answer this question