Details
Replacement Dyson Motor for DC07/DC14 models with CLUTCH System.
.
![]()
![]()
Dyson used two different motor styles in their DC07 uprights. If you have a unit that has a Panasonic-made motor in it, some modification of the front rubber motor support may be necessary in order to use this motor. This can be done with a sharp knife by simply trimming away the heavily-ribbed portion of the Dyson front motor support. Discard the trimmed portion and retain the modified front support. Our part number 1430000401, which is a motor support gasket for Filter Queen motor, can be modified to support the motor from the sides. Cut away the thicker area of the 1430000401 gasket and discard; you will only need the thinner ribbed part. Place this modified Filter Queen gasket around the motor to support it from side to side, and install the motor in the housing. Replace the modified Dyson front motor support, and snap on the motor cover. (This procedure is sound and has worked without flaw in-house; however, is has not been tested for long-term reliability.)
- Fits: All DC07 Series i.e.
DC07 All Floors, DC07 Low Reach, DC07 Animal, DC07 Full Gear, DC07 Pink, DC07 Original - Includes leads for easy hookup
- Dyson Replacement Vacuum Cleaner Motor
- Replaces Original Dyson Part Numbers: 905455-01, 90545501, 905455-02, 90545502
- NOTE: ONLY REPLACES THE YDK MOTOR. If your Dyson Does Have the Name "Panasonic" Imprinted on the Motor, this replacement motor WILL NOT FIT YOUR VACUUM.
IMPORTANT: Replacing a vacuum motor should only be attempted by an experienced technician. Dyson used two different motor styles in their DC07 uprights. If you have a unit that has a Panasonic-made motor in it, some modification of the front rubber motor support may be necessary in order to use our replacement motor. This can be done with a sharp knife by simply trimming away the heavily-ribbed side portion of the Dyson front motor support. Discard the trimmed side portion and retain the modified front support.
.
Dyson Motor Modification For DC07 Units Using a Panasonic Motor
Dyson used two different motor styles in their DC07 uprights. If you have a unit that has a Panasonic-made motor in it, some modification of the front rubber motor support may be necessary in order to use this motor. This can be done with a sharp knife by simply trimming away the heavily-ribbed portion of the Dyson front motor support. Discard the trimmed portion and retain the modified front support. Our part number 1430000401, which is a motor support gasket for Filter Queen motor, can be modified to support the motor from the sides. Cut away the thicker area of the 1430000401 gasket and discard; you will only need the thinner ribbed part. Place this modified Filter Queen gasket around the motor to support it from side to side, and install the motor in the housing. Replace the modified Dyson front motor support, and snap on the motor cover. (This procedure is sound and has worked without flaw in-house; however, is has not been tested for long-term reliability.)
California residents see Prop 65 WARNINGS 
WARNING! This product contains a chemical know to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warning.ca.gov
WARNING! This product contains a chemical know to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warning.ca.gov- You can also find this product in:
Additional Information
| SKU | 90545501 |
|---|---|
| Brand | Dyson |
Hello, do you have the Dyson DC07 motor in stock ?
A:
We do have the YDK motor in stock
Support answered on July 5, 2019
Dyson DC07 Animal
Printed on motor:
YV-2430A Y-F, 120V 60HZ 12.7A
Will your motor fit?
A:
Only if it is a YDK motor.
EZvacuum Support answered on April 1, 2020
What is the wattage of the motor? Is it 1600 or 2200? Thanks
A:
Its a 120V motor
EZvacuum Support answered on April 13, 2020
