Details
Brand New Genuine Ametek Lamb 2-Stage 5.7" Hi Performance Electric Motor. Fits some TriStar, some Miele like S4 and S4000 series, S428I, S4212, Miele S434i (White Pearl) which takes 06189340 motor except Miele 3000 Series vacuums, and some other vacuum cleaners. Use on Miele models which uses H/J/G bags. Also fits some blower models. Will work for NuTone 352
Motor Dimensions:
Fan Housing: 5.7"
Overall Height: 6 1/4" (Not including the metal flange that protrudes from the bottom of the metal fan housing on some original motors.)
May replace 4698861, MN4424240, 189990 42 but needs adjustment
⚠ Does not fit newer Miele Models. Please confirm with us before ordering.
Please check the motor specs before ordering.
Thru Flow Vacuum Motor/Blower, Body Diameter 5.7 Inches, Blower Stages 2, Voltage @ 50/60 Hz 120 Volts, Maximum Current Rating 10.8 Amps, Maximum Air Power 447 Watts, Bearing Ball/Ball, Air Flow @ 2 Inches Orifice 122.0 CFM, Vacuum (H2O Sealed) 100.4 Inches, Thermal Protection No, Style B, Overall Height 6 3/16 Inches, High Efficiency. Prt #115923, 115-923, 117923-23, 117923, 7923-23
Note: EZvacuum.com is not Miele Authorized Dealer. The part above is not a Genuine Miele OEM product but is a "Made for Miele", also referred to generic or aftermarket replacement part. Miele's warranty will not apply on this item.
.
Motor Dimensions:
Fan Housing: 5.7"
Overall Height: 6 1/4" (Not including the metal flange that protrudes from the bottom of the metal fan housing on some original motors.)
May replace 4698861, MN4424240, 189990 42 but needs adjustment
⚠ Does not fit newer Miele Models. Please confirm with us before ordering.
Please check the motor specs before ordering.
Thru Flow Vacuum Motor/Blower, Body Diameter 5.7 Inches, Blower Stages 2, Voltage @ 50/60 Hz 120 Volts, Maximum Current Rating 10.8 Amps, Maximum Air Power 447 Watts, Bearing Ball/Ball, Air Flow @ 2 Inches Orifice 122.0 CFM, Vacuum (H2O Sealed) 100.4 Inches, Thermal Protection No, Style B, Overall Height 6 3/16 Inches, High Efficiency. Prt #115923, 115-923, 117923-23, 117923, 7923-23
Note: EZvacuum.com is not Miele Authorized Dealer. The part above is not a Genuine Miele OEM product but is a "Made for Miele", also referred to generic or aftermarket replacement part. Miele's warranty will not apply on this item.
.
Some of the customers may experience some issue in installing this motor. One of our customer got it resolved by going some extra steps. As per him,
"The fan shroud on this motor is different from the one on the motor in the vacuum. I just removed the blower housing from the old motor and put it on the new one, and also moved over the board with all the wiring and hooked up the power leads to that board in the same postilions where the old wires were plugged in.
Just to be safe, I ran a sharpie around the edge of the blower housing on the new motor so I would be able to install the new housing correctly. All it takes is a large screwdriver, a hammer and some patience to move the blower housings. "
He has a Miele White Star. Hope this information is useful. Thanks to George for sharing this.
"The fan shroud on this motor is different from the one on the motor in the vacuum. I just removed the blower housing from the old motor and put it on the new one, and also moved over the board with all the wiring and hooked up the power leads to that board in the same postilions where the old wires were plugged in.
Just to be safe, I ran a sharpie around the edge of the blower housing on the new motor so I would be able to install the new housing correctly. All it takes is a large screwdriver, a hammer and some patience to move the blower housings. "
He has a Miele White Star. Hope this information is useful. Thanks to George for sharing this.
California residents see Prop 65 WARNINGS WARNING! This product contains a chemical know to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warning.ca.gov
- You can also find this product in:
Additional Information
SKU | 115923 |
---|---|
Brand | Ametek Lamb |
Manufacturer | Ametek Lamb |
OK- I am looking to replace the motor for a Miele, model#S4341.
The motor I took out is a Lamb Electric 117923-23, dated 10/23/00Do you have a proper
A:
This one will work
Support answered on July 2, 2019
Is this Lamb Ametek part # 117923-23? The image shows 115923!
A:
Both are same motors
Support answered on June 25, 2019
Need motor for Miele S301i please. I think this is the correct one?
Thanks!
A:
Yes. It will work.
Support answered on November 12, 2018
Will this motor work in the Solaris s514 turbo?
A:
Yes.
EZvacuum Support answered on January 2, 2020
Hi. Will this motor fit the s314i red star? thanks!
A:
Please buy this one: https://www.ezvacuum.com/ametek-115923-blower-vacuum-motor-p-4866.html
Support answered on April 17, 2019
Will this fit the Miele Red Velvet S558?
A:
Please send us a picture of the current hose in the machine showing the design and the label on it.
EZvacuum Support answered on March 11, 2020
Will this fit a s 248i?
No answers yet.
Be the first to answer this question
Be the first to answer this question
Will this motor work in a Miele Flemnco II Type S 251I
A:
Yes
Support answered on September 21, 2018
Will this motor fit the S3181?
No answers yet.
Be the first to answer this question
Be the first to answer this question
Will this fit on my Miele s247i?
A:
Yes
EZvacuum Support answered on December 30, 2019
Will this work for model SGDE0 ?
No answers yet.
Be the first to answer this question
Be the first to answer this question
Will this work for a miele s6270?
A:
Please send us a picture of the motor showing the model and serial and we will verify.
EZvacuum Support answered on February 23, 2020
Hi, Will this motor work for Miele S4210 ?
A:
NO
mordechai taub answered on November 10, 2020
Hi, Will this motor fit Miele S5280 (Callisto)?
A:
No
Support answered on June 11, 2018
will this motor work with a miele s7280 (jazz)
A:
No
Support answered on August 5, 2019