Similar Items
Shark Rocket Powerhead Exhaust Filter #XEXFH400 for AH400, AH400C, AH401, AH452, AH452W, AH454Q
$10.99
Shark Rocket Pre Motor Filter 1080FTV320 for HV319Q, HV320, HV320C, HV320W, HV321, HV322, HV322Q, HV324Q, HV325, UV330, UV422, UV422CCO, UV425CCO, etc, 660
$19.99
Shark Rocket 3pc Foam & Felt Filter COMBO Kit XFFV300 for HV292, HV300, HV300C, HV300W, HV300WC, HV301, HV301C, HV302, HV302Q, HV303, HV305, HV310, UV450, UV450CCO, UV450CCOFS etc, 655
$20.99
Shark Rocket Pre Motor Filter for HV319Q, HV320, HV381, HV382, HV383, HV384Q, UV330, UV422, UV422CCO, UV425CCO. Replaces 1080FTV320
$14.99
Details
Genuine Shark XFF450 replacement foam filter kit. Fits NV200, NV200C, NV200Q, NV201, NV202, NV202C , NV350, NV352, NV355, NV356E, NV370, NV372, NV450, NV480, NV480C, NV480Q, NV482, NV391, NV450, NV451, NV472, NV480, UV440, UV490CCO, UV540,
Shark Rotator Professional NV450
Shark Rocket Professional Performance Plus NV472
Shark Rocket Pro NV480
Shark Rocket professional model NV484
NV480, NV480 26, NV481, NV482
Both Filters are Washable and Reusable, and Recommended to Be replaced After 6 Washes.
part no # XFF450
.
Shark Rotator Professional NV450
Shark Rocket Professional Performance Plus NV472
Shark Rocket Pro NV480
Shark Rocket professional model NV484
NV480, NV480 26, NV481, NV482
Both Filters are Washable and Reusable, and Recommended to Be replaced After 6 Washes.
part no # XFF450
.
How to change XFF450 Filters
1 Press the dust cup release button and lift the dustcup off the vacuum.
2 Holding the dust cup over a garbage bag or can, press the bottom empty release latch located near the bottom of the front of the dust cup.
3 Press the top dust cup release latch to access and clean dust screen as required.
4 With the dust cup removed, remove the foam and felt filters. Replace it with the filters kit you just bought at EZvacuum.com. After every 5 vacuum uses, rinse the filters with cold water. Let air dry completely before replacing. Hand wash only. Tap loose dirt off filters between washes as needed.
5 Remove and rinse the HEPA filter frame every 3 Months. First, remove the floor nozzle by pressing the red nozzle release button on the side of the vacuum. Turn the latch to the unlock symbol to release the filter frame. Remove the the HEPA filter and replace it with HEPA Filter XHF450
6 Re-assemble back on to floor nozzle
1 Press the dust cup release button and lift the dustcup off the vacuum.
2 Holding the dust cup over a garbage bag or can, press the bottom empty release latch located near the bottom of the front of the dust cup.
3 Press the top dust cup release latch to access and clean dust screen as required.
4 With the dust cup removed, remove the foam and felt filters. Replace it with the filters kit you just bought at EZvacuum.com. After every 5 vacuum uses, rinse the filters with cold water. Let air dry completely before replacing. Hand wash only. Tap loose dirt off filters between washes as needed.
5 Remove and rinse the HEPA filter frame every 3 Months. First, remove the floor nozzle by pressing the red nozzle release button on the side of the vacuum. Turn the latch to the unlock symbol to release the filter frame. Remove the the HEPA filter and replace it with HEPA Filter XHF450
6 Re-assemble back on to floor nozzle
California residents see Prop 65 WARNINGS WARNING! This product contains a chemical know to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warning.ca.gov
- You can also find this product in:
Additional Information
SKU | XFF450 |
---|---|
Brand | Shark |
Manufacturer | Shark |